DX-1205F Desktop DC Gauss Meter
Introduction
The DX-1205F digital Gauss meter is a multifunctional, portable, and high-precision magnetic measurement instrument. Equipped with high sensitivity, low drift Hall sensors, and advanced digital signal processing technology, it has small size, light weight, and low power consumption. Very suitable for on-site measurement of surface magnetic field of permanent magnet materials, residual magnetism of mechanical parts, constant DC magnetic field, magnetic separators or iron removers, etc. It can be widely used in magnetic material production and application units, measurement and testing institutions, mechanical manufacturing enterprises, university research units, etc.
The DX-1205F Gaussmeter is a new advancement in Hall effect magnetic field strength measurement instruments, designed and manufactured using high stability constant current source circuit technology as a desktop Gaussmeter. The testing probe adopts an imported GaAs linear Hall chip, and the difference between the probes is very small. If damaged by the user, it can be directly replaced, making it an ideal magnetic field testing instrument.
Parameters
|
Input power |
AC200-240V, 50/60Hz, 1A |
|
Display mode |
TFT true color LCD screen, 6 bits display |
|
Size |
307mm*260mm*120mm |
|
Net weight |
Approx.3.5kg |
|
Usage environment |
Temperature: 0℃-50℃, humidity: 40%RH-85%RH |
|
Thermal equilibrium time |
10 minutes |
|
Test frequency |
DC |
|
Range |
±1000Gs/±3000Gs/±10000Gs /±30000GS 4 ranges |
|
Unit display |
Gs,mT,Oe,kA/m |
|
Special function |
Automatic one click zero adjustment, non-linear correction |
|
Sorting function |
The upper and lower limit sorting parameters can be manually set, and the device will automatically prompt in red and green when NG/OK is activated |
|
Accuracy |
±(0.45% reading value+100uT) |
|
Temperature coefficient |
-0.06%/℃ |
|
Min.resolution |
0.01Gs |
|
Peak value function |
Peak holding function. Two modes: 1. Test Peak Mode; 2. Peak Hold. The product can lock in very low magnetic field peaks (0.1Gs --30000Gs) |
|
Probe sensor area |
0.3mm*0.3mm |
|
Probe choice |
Standard: transverse probe, optional: axial probe |
|
Interface |
Standard 15 pins, DB connector |
|
Communication port |
B type USB connector |
|
Automation interface |
Welding free plug-in interface (optional) |
|
Digital Output |
RS232C interface (optional) |
|
Analog output |
Full range corresponds to ± 10V, solderless plug-in interface |
|
Test software |
Windows XP,Windows 7 ,Windows 10 |
Features
3.1. Direct reading of measured magnetic field;
3.2. DC polarity judgment;
3.3. One key of auto-zero;
3.4. One key of range switch;
3.5. Setting the maximum and minimum values of the measured magnetic field;
3.6. Hints when exceeding maximum and minimum values setting;
3.7. With RS232 interface and software, connected with PC.
Probe options
4.1Drawing of probes
4.2Probe parameters
Axial probe: L60mm, Dia. 5.0mm, Sensitive area: 0.5mm×0.5mm;
Transverse probe (Standard probe): L60mm, W4.0mm, T1.0mm, Senstive area: 0.5mm×0.5mm;
4.3Actual picture of probe
Standard configuration
|
No. |
Item |
Model |
Qty |
|
1 |
Tester |
DX-1205F |
1 |
|
2 |
Transverse probe |
For DX-1205F |
1 |
|
3 |
Software |
DX |
1 |
|
4 |
Warranty card |
Dexing |
1 |
FAQ