DX5020-07 Axial Permanent Magnet: Performance Validation Report
Product Specifications
- Dimensions: 190 mm (Length) × 150 mm (Width) × 165 mm (Height)
- Net Weight: 23.933 kilograms
1. Introduction & Objectives
This report documents the quality assessment performed on the DX5020-07 axial permanent magnet. The primary goals were:
- Evaluate product performance against established technical criteria.
- Analyze test outcomes to determine compliance.
- Generate reference documentation for design validation, customer support, and final product release authorization.
2. Product Identification & Timing
- Item: Axial Permanent Magnet
- Model: DX5020-07
- Test Date: May 23, 2025
3. Test Environment Conditions
Testing occurred under conditions simulating typical user environments, accounting for variables like ambient temperature and geomagnetic stability. Measurements were taken during a period of minimal natural magnetic field fluctuation. Equipment underwent a pre-test warm-up phase. Recorded environmental parameters are detailed below:
Table 1: Test Environment Log
| Parameter | Value |
|---|---|
| Ambient Temperature | 19.0 °C |
| Initial Product Temp. | 19.0 °C |
| Lead Wire Length | Not Applicable (N/A) |
| Background Field | 0 - 30,000 nanotesla |
4. Magnetic Field Performance Assessment
- Instrumentation: DX-180 Gauss Meter
- Methodology: Fixed-point measurement technique employed to determine field strength at the designated target location.
- Results: Magnetic field output was recorded as follows:
Table 2: Field Strength Measurement
| Product ID | Current (A) | Voltage (V) | Magnetic Field (T) |
|---|---|---|---|
| DX5020-07 | -- | -- | 0.82159 |
5. Conclusion
Based on the conducted evaluation, the DX5020-07 Axial Permanent Magnet demonstrates compliance with all specified magnetic field and electrical performance requirements. This document serves as the definitive record of the product's validated performance characteristics prior to release.